Product Data Sheet Show all documents

Sika® Antisol® S

Concrete Curing Agent

Sika® Antisol® S is a ready to use solvented spray applied liquid curing agent to prevent water loss from the surface of freshly placed concrete. It forms a micro-crystalline seal in the concrete pores reducing the moisture evaporation rate from the concrete mix. Adhesion of subsequent treatments to concrete surface is not impaired.

  • Generally improves the surface appearance
  • Reduces cracking
  • Controls cement hydration
  • Reduces dust formation
  • Reduced concrete permeability
  • Alleviates other costly curing methods
  • Adhesion of subsequent treatments to concrete surface is not impaired.
Product Data Sheet Show all documents

Usage

Treatment of vertical surfaces which will require subsequent treatments or where resin / water based curing membranes would be unsuitable. Exposed concrete such as:
  • Buildings
  • Manufacturing industries
  • Hangars and loading areas
  • Retaining walls
  • Pre-stressed structures
  • Irrigation channels
  • Civil Engineering structures
 

Advantages

  • Generally improves the surface appearance
  • Reduces cracking
  • Controls cement hydration
  • Reduces dust formation
  • Reduced concrete permeability
  • Alleviates other costly curing methods
  • Adhesion of subsequent treatments to concrete surface is not impaired.

Packaging

20 kg can and 220 kg drum.

Colour

Transparent liquid

Product Details

Product Information

Shelf Life

12 months from date of production

Storage Conditions

The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +30 °C. Always refer to packaging.

Density

~1.07±0.05 kg/l

 

Application

Consumption

Consumption

0.15–0.20 kg/m2

Consumption depends on wind speed, temperature and humidity during application.

These figures are theoretical and do not allow for any additional material due to surface porosity, surface profile, variations in level or wastage etc.
Application steps

APPLICATION

Vertical Surfaces

After removing the formwork, dampen down the concrete thoroughly with fresh water allowing the surface water to drain off. Spray product in a fine mist to completely cover the concrete surface. Maintain the pressure in the application equipment to ensure a consistent spray.

Horizontal Surfaces

Spray product in a fine mist to completely cover the concrete surface. Maintain the pressure in the application equipment to ensure a consistent spray.

Documents