You have just stepped into the library of Sika's expert know-how. Feel free to search a specific topic or browse general articles at your leisure. Check back often as new articles are published regularly.  

Suggested Searches
Application Field

Application Field

3D Concrete Printing Adhesive Below-Grade Waterproofing Building Envelope Cement Admixture Concrete Concrete Admixture Concrete Repair Construction Adhesive Cool Roof Decorative Floor Engineered Repair Expansion Foam Facade Flooring Industrial Coating Industrial Flooring Injection Joint Sealing Mortar Passive Fire Protection Protective Coating Roofing Sealant Shotcrete Tile Setting Wall Coating Waterproofing Waterproofing Membrane Watertight Concrete
Project Type

Project Type

Car Park Factory Healthcare Industrial
Reset
  • Cement Admixture
  • SikaGrind®

Progress with Grinding Aids for Vertical Roller Mills

The effect of grinding aids on the comminution of cement is based on the dispersion of fine particles. It is a misunderstanding that grinding aids for vertical roller mills (VRMs) should stabilise the material bed between the rollers and the table by adhesive forces between the particles. Grinding aids reduce the polarity of the cleaved surface and the attraction forces between particles.
  • Cement Admixture
  • SikaGrind®

Performance Enhancer for Portland Limestone Cement (PLC)

The motives to replace clinker with supplementary cementitious materials (SCM) are well known. However, granulated blast furnace slag, natural pozzolanes, qualified fly ash and further SCM have a limited availability; the total potential replacement of the global clinker production is less than 30%. Limestone is increasingly being used as a component in Portland-Limestone cements: Sika offers an additive to enhance grinding and performance.
The evaporation of cement additives dosed on hot clinker
  • Cement Admixture
  • SikaGrind®

Addressing the Unwanted Impacts of Grinding Aids

Grinding aids and strength enhancers are well known for their ability to increase cement mill productivity, and the mechanical strength of mortar and concrete. However, little information is available on the potential drawbacks of their usage. To close the gap, Sika Services addresses the possible impacts on health and safety and the environment, and on cement properties in production and use.
Intumescent material for fire protection
  • Passive Fire Protection
  • Expansion Foam
  • Article

Intumescence and Intumescent Materials for Fire Protection Products

Many passive fire protection products are claimed to be intumescent – what does this mean and when can a product be classed as intumescent?
Industrial floor coating with Sikafloor resin cementitious flooring system in food facility
  • Flooring
  • Industrial Flooring
  • Factory
  • Article
  • Architect

Design Tips for Hygienic Floors in Food and Beverage Facilities

A functional and purpose-built floor is key to a safe and hygienic production environment in food and beverage facilities. Floors that are hygienic, non-slip, easy to clean, and durable provide a safe and attractive place to work. Choosing and installing the right floor are critical to every work environment. This article looks at getting it right the first time — achieving satisfactory and long-term flooring in a food processing environment.
Clean red and white decorative laboratory interior floor with female research technician at work
  • Flooring
  • Decorative Floor
  • Healthcare
  • Sika ComfortFloor®
  • Article
  • Architect

Designing colorful floor in hospitals and other healthcare facilities

A well-crafted color palette can do wonders for a healthcare facility. The use of color and graphic images can align to the existing logo and symbolic color of the facility to achieve an overall visual aesthetic, while it can also elicit emotions and unique perceptions of space. It has an ability to calm or excite, can make a room appear smaller or more grandiose, or even trigger subconscious reactions. Color is the most vital, impactful and expressive design element in a designer’s toolbox.
Man spraying mortar on the wall
  • Concrete Repair
  • Engineered Repair
  • Mortar
  • Sika MonoTop®
  • Article
  • Applicator

Dry vs Wet Machine Applied Mortars for Concrete Repairs

Concrete repairs can be conducted with different systems and methods. In the European Standard EN 1504 Part 9, Principle 3 defines the application of repair mortars by machine as well as by hand. In this article you will learn about the advantages of machine application for both dry and wet spray processes. We also give an overview of how to select the right method and equipment for each type of application together with the corresponding Sika materials.
Industrial floor coating with Sikafloor resin cementitious flooring system in food facility
  • Flooring
  • Industrial Flooring
  • Factory
  • Sikafloor®
  • Article

Slip Resistant Flooring in Food Industry for Employee Safety

Employee safety is one of the most important requirements for any workplace. Slips and falls are among the most common injuries at work. They account for about 86% of total injuries, and 90% of these happen because the floor is wet. These injuries are particularly prevalent in the food industry, where they occur four times more often than the average in other industries. Injuries can create significant impacts to all involved. The most significant is the suffering and possible disabling of the person injured. The next is impact on the company — financial, loss of key staff, loss of productivity, and liability.
Hygienic floor and wall coating in hospital made with Sika coating systems
  • Flooring
  • Wall Coating
  • Healthcare
  • Article
  • Architect

Hygienic floors, walls and ceilings in hospitals and other healthcare facilities

Infection prevention and control is of utmost importance in hospitals and other healthcare facilities. Building owners, facilities managers, healthcare architects and all others involved in healthcare design decisions need to consider how the materials used within a building contribute to this issue.
Workers applying wood floor adhesives
  • Flooring
  • Construction Adhesive
  • Adhesive
  • Article

The Science Behind Wood Floor Adhesives

The task of wood floor adhesives is to firmly bond the organic wood floor elements to the generally inorganic screed. The adhesive must hold the wood in place, connect it to the underlying screed and transfer stress originating from the natural expansion and contraction of the wood to the generally rigid screed. The undesired but natural movement of the wood can become visible in cupping, joint formation, or in extreme situations failure of the adhesive or screed.
Screed evaluation method: Cross-hatch testing for surface strength
  • Flooring
  • Article

Screed Evaluation Methods

A prerequisite for a sustainable and beautiful wood floor is a strong and dry screed. Therefore this screed has to be carefully accessed. The first source of information is the architect, engineer, or main contractor who will have all of the information about the build-up and nature of the floor. The second source is the screed contractor who can provide the screed details and if appropriate, any subfloor heating protocols. If, as so often in renovation projects most of this information is not available, there are a few simple methods that can be used to evaluate the screed.
Man applying SikaScreed on floor
  • Flooring
  • Article

Potential Screed Issues and Solutions

If the screed is even, strong and dry enough, then only mechanical surface preparation such as grinding and cleaning is required, before wood floor bonding is possible. However there are many situations where the existing or even new screeds are not suitable, and additional treatment is necessary before wood flooring can be installed. Sika has developed complete balanced system solutions for all of the different possibilities that may be found in these situations.
Application of Shotcrete with Sigunit accelerator
  • Concrete
  • Concrete Admixture
  • Shotcrete

Sprayed Concrete

Successful sprayed concrete requires the combination of many aspects of modern concrete technology especially concrete admixture chemistry, together with modern materials handling technology. The increasing demands for cost-effectiveness and the protection of health and the environment mean that sprayed concrete has been in continuous development. Thanks to more than one hundred years of experience, expert knowledge and a focus on performance and economy, Sika is able to provide the newest generation of sprayed concrete solutions.
Fireman extinguish the fire with water
  • Joint Sealing
  • Sealant
  • Passive Fire Protection
  • Article

International Standards and Classifications for Fire Testing

Sika’s passive fire protection solutions are designed to be able to seal all different types of building joints and penetrations, in order to help keep fire in defined compartments for a certain period of time, thereby allowing people to evacuate safely. Sika passive fire protection solutions comply with the most relevant national and international standards (including EN, UL, EAD (ETAG), ASTM, AS, Certifire), in order to confirm that they meet the highest fire resistance requirements and consequently can help save people’s lives.
Fire resistance illustration of Insulation (I)
  • Joint Sealing
  • Sealant
  • Passive Fire Protection
  • Article

Linear Seals, Cavity Barriers and Service Penetration Seals

Sika provides comprehensive solutions where fire resistant construction is required such as commercial, public and residential buildings, steel structures and others. Fire resistant sealants, fillers and backing materials for linear seals as well as solutions for penetration seals enable safer buildings and infrastructure to be built. Passive fire protection applications for compartmentations can be divided into the following three main groups: linear joint seals, cavity barriers, penetration seals.
Loading...