Product Data Sheet Show all documents

Sika® CNI

Corrosion Inhibiting Admixture

Sika® CNI is a calcium nitrite-based admixture designed to inhibit the corrosion of steel in reinforced concrete. Sika® CNI contains a minimum of 30 % calcium nitrite by mass and meets the requirements of ASTM C 1582, Corrosion Inhibiting Admixture and ASTM C494, Type C, Accelerating Admixture.

Sika® CNI is recommended for conventional steel reinforcement as well as prestressed or post-tensioned concrete that will be exposed to chlorides from marine environments or deicing salts. Sika® CNI will extend the service life of structures by effectively inhibiting corrosion, in areas such as parking garage decks and support structures, bridge decks, marine structures and many others.     Sika® CNI may also be used in concrete elements where chlorides are added initially to the concrete mix.    Sika® CNI is a corrosion-inhibiting admixture that provides protection against corrosion in reinforced concrete structures. Sika® CNI:
  • Extends the service life of reinforced concrete structures.
  • Is recommended for use in all types of reinforced concrete, precast and/or prestressed concrete as well as ready mix applications.
Product Data Sheet Show all documents

Usage

In the high alkalinity of concrete, reinforcing steel builds up a natural passivation layer. This layer protects the steel from corrosion. This passive ferric oxide layer however can be damaged by the presence of chlorides and combined with the presence of moisture and oxygen which will lead to corrosion of the steel.     Sika® CNI will help oxidize the steel to form ferric oxide, which resists chloride attack. This reduces the areas of ferrous oxide ions that are susceptible to attack by chlorides. Ferrous oxide creates a ferrous oxide complex (rust), if attacked by chlorides. In the presence of these chlorides, rust continues to generate in these areas (corrosion pits) and ultimately leads to staining, cracking and spalling of the
concrete.    Sika® CNI fortifies the ferric oxide passivating layer prior to the penetration of chlorides. The nitrite ions in Sika® CNI will convert ferrous oxide to more resistant ferric oxide, thereby protecting the steel reinforcement from corroding.  

Advantages

Sika® CNI is recommended for conventional steel reinforcement as well as prestressed or post-tensioned concrete that will be exposed to chlorides from marine environments or deicing salts. Sika® CNI will extend the service life of structures by effectively inhibiting corrosion, in areas such as parking garage decks and support structures, bridge decks, marine structures and many others.     Sika® CNI may also be used in concrete elements where chlorides are added initially to the concrete mix.    Sika® CNI is a corrosion-inhibiting admixture that provides protection against corrosion in reinforced concrete structures. Sika® CNI:
  • Extends the service life of reinforced concrete structures.
  • Is recommended for use in all types of reinforced concrete, precast and/or prestressed concrete as well as ready mix applications.

Packaging

Available in 55 gallon (208 liter) drums, 275 gallon (1040 liters) totes and bulk delivery.

Colour

Greenish Liquid

Product Details

Product Information

Shelf Life

Shelf life when stored in dry warehouse conditions between 50 °F and 80 °F (10–27 °C) is one year minimum.

Storage Conditions

Sika® CNI should be stored above 40 °F (5 °C). If frozen, thaw out and agitate thoroughly to return to normal state before use.

Specific Gravity

Approx. 1.3

Application

Application Information

Dispensing

Measure the required quantity manually or by automated dispenser. Add Sika® CNI directly into the freshly mixed concrete at the end of the batching cycle. When used in combination with other admixtures, care must be taken to dispense each admixture separately into the mix.

Mix water adjustment is necessary to account for the water in Sika® CNI and thus, maintain the required water/cementitious ratio. The batch water must be adjusted by reducing 7.0 lbs. (0.839 kg) of water per gal. (Liter) of Sika® CNI.

  

Compatibility with other Admixtures: Sika® CNI can be used with Portland cements compliant with ASTM, AASHTO or CRD specifications. It can be used in combination with other Sika admixtures including microsilica, water reducers, superplasticizers, set retarders and air entrainment agents. Admixtures have to be added separately to the concrete mix in order to deliver the results required. Sika® CNI may slightly reduce the entrained air content and a higher dosage of the air entrainment agent may be required.
Consumption

Recommended Dosage

The recommended dosage rate will vary between 2 and 6 gallons per cubic yard (10-30 L /m3) of concrete, depending on the severity of the corrosion environment. In absence of a specified dosage rate, please contact your local Sika representative. Adjust water content accordingly. Sika® CNI may accelerate the setting time. In order to prevent slump loss or finishing characteristics, a set retarding admixture, like Plastiment®, may be required, especially in warm weather application. The full accelerating effect of Sika® CNI may be used for cold weather concreting.

Documents