Product Data Sheet Show all documents

Sikagard®-960 Protect

(former Davco® 760 Passivant Acier)

SINGLE COMPONENT PAINT PROTECTION AGAINST CORROSION

A high-performance reinforcement primer for the corrosion protection of steel reinforcement bars.

  • Protection against corrosion
  • Excellent resistance to sea water
Product Data Sheet Show all documents

Usage

  • To provide an alkaline passivating cover to old and new reinforcement.
  • For subsequent application / bonding of concrete, cementitious or epoxy repair mortar.
 

Advantages

  • Protection against corrosion
  • Excellent resistance to sea water

Packaging

5 ltr can

Colour

Reddish brown liquid

Product Details

Product Information

Shelf Life

12 months from date of manufacture

Storage Conditions

Stored in unopened original packing in dry, frost-free conditions.

Density

1.00 ± 0.02
Technical Information

Corrosion Resistance

Rust inhibition

> - 0.20

(ASTMC 876:2015)

Application

Application Information

Slip Resistance

Bond performance

Free end slip not more than 0.2 m

(SS 2 Appendix A)

Drying Time

Approx. 1 hour

 
Consumption

Consumption

The recommended coverage is 59 ml/m². 
Application steps

SUBSTRATE PREPARATION

Once the designated repair area has been identified, the reinforcing bars should be exposed by hacking back (15 - 20 mm behind bars) to a sound substrate. The bars should be cleaned by either blasting (to Swedish standard SA 2½) or using hand held grinding tools (to SA 2 or 3) and dusted off. The reinforcement should be free from moist, dust, oil and other contaminants before priming.

APPLICATION

Sikagard®-960 Protect is applied direct from the can using a brush and apply evenly, do not over-apply or apply too thick. Care must be exercised to ensure complete coverage of the exposed reinforcing bar. Subsequent repair mortars or concrete may be applied after the application of Sikagard®-960 Protect. Allow Sikagard®-960 Protect to dry before subsequent application of mortars or concrete.

 

Documents