Product Data Sheet Show all documents

SikaGrout®-168 Panel

(former Davco® Panel Grout ECO)

FIBRE-REINFORCED, NON SHRINK CEMENTITIOUS PANEL GROUT

SikaGrout®-168 Panel is an eco friendly, non shrink grout that is ideal for fixing the joints of both Precast Concrete Panels and Light Weight Panels. It is fibre reinforced to prevent hairline cracks, and to strengthen the adhesion between panels.

  • Environmentally friendly product.
  • Fibre reinforced to prevent hairline cracks from occurring.
  • Non shrink to prevent drying shrinkage.
  • Premixed for ease of use and good consistent quality.
  • Good weather resistance and highly durable.
Product Data Sheet Show all documents

Usage

SikaGrout®-168 Panel is designed for use as panel adhesive between panels in the installation of Precast Concrete and Light Weight Concrete Walls.  

Advantages

  • Environmentally friendly product.
  • Fibre reinforced to prevent hairline cracks from occurring.
  • Non shrink to prevent drying shrinkage.
  • Premixed for ease of use and good consistent quality.
  • Good weather resistance and highly durable.

Packaging

25 kg/bag

Colour

Grey Powder

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

Singapore Green Building Product (Leader) Cert. No. SGBP 3621
Product Information

Shelf Life

12 months from the date of production

Storage Conditions

Store properly in original, unopened and undamaged sealed packaging in dry conditions. Keep away from direct sunlight and frost.
Technical Information

Compressive Strength

≥ 40

(ASTM C109 : 2016a)

Shear Adhesion

Slant shear bond strength

≥ 1.5

(BS EN 12615 : 1999)

Change of volume

Lower limit0
Upper limit+ 3

Application

Application Information

Mixing Ratio

4.5 - 5.5 ltr of water to 25 kg

Pot Life

< 60 minutes

Open Time

≤  20 minutes @ 25 °C

Initial Set Time

≥ 60

(BS EN 196 : 3 : 2005 +A1 : 2008)

Final Set Time

≤ 240

(BS EN 196 : 3 : 2005 Final ≤ 240 +A1 : 2008)
Consumption

Consumption

 ~ 20 m² / 25 kg (per mm thick)
Application steps

SURFACE PREPARATION

Surface should be cleaned and loose materials, dust, oil or traces of foreign materials removed. Damp the surface with water before application.

MIXING

Mix thoroughly using an electrical mixer or a paddle mixer for 3 to 5 minutes until the desired homogeneous paste is achieved. Ensure the mixed grout is free from lumps and workable.
Allow the mixture to stand for a few minutes, then re-mix again before use.

APPLICATION

SikaGrout®-168 Panel can be applied to joint substrate with an appropriate trowel or pumped to fill the gap between panels . The material can be applied at a recommended thickness of 2 - 20 mm. Ensure good contact is achieved between joint adhesive and panel surface.

Documents