Product Data Sheet Show all documents

Sikafloor®-2045 Courtkote

(former Davco® CourtKote)

ALL WEATHER SPORTS SURFACING SYSTEM

Sikafloor®-2045 Courtkote is a durable sports surface coating that comprises of pigmented acrylic finish used in conjunction with Sikafloor®-2046 Neutral Filler to obtain the desired colour.

The sports surfacing system is a blend of Sikafloor®-2046 Neutral Filler and Sikafloor®-2045 Courtkote to produce a specially formulated acrylic coating for application over asphalt and concrete surfaces. It has a variety of recreational uses, the most common being the all weather sports courts.

  • Flexible and fade-resistant.
  • Resists extreme temperatures.
  • Tough and durable coloured surface of uniform texture.
  • Non-glare
  • Controlled texture for non-slip.
Product Data Sheet Show all documents

Usage

 
  • Hardcourt surface for sports
  • Bicycle paths
  • Playgrounds
  • Other hard surface areas
  • Where an attractive, controlled texture is desired

Advantages

  • Flexible and fade-resistant.
  • Resists extreme temperatures.
  • Tough and durable coloured surface of uniform texture.
  • Non-glare
  • Controlled texture for non-slip.

Packaging

20 ltr/pail

Colour

Standard Colour

RedGrass Green
Mid BlueBlue

Special Colour

PlatinumDark Blue
Dark GreenGrey

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

Singapore Green Building Product (Leader) Cert. No. SGBP 3488
Product Information

Shelf Life

12 months from the date of production

Storage Conditions

Store properly in original, unopened and undamaged containers in dry conditions. Keep away from direct sunlight and frost.

 

Application

Application Information

Mixing Ratio

1st coat

3 parts Sikafloor®-2046 Neutral Filler to 1 part Sikafloor®-2045 Courtkote with 2 parts water.

2nd coat

3 parts Sikafloor®-2046 Neutral Filler and 2 parts Sikafloor®-2045 Courtkote diluted with 2 parts water
Consumption

Consumption

Approx. quantities required for 100 m² (Depending on substrate porosity)
1 x 20 litres Sikalastic®-500 Acrylic Primer AP (formerly Davco® Acrylic Primer)
3 x 20 litres Sikafloor®-2046 Neutral Filler
2 x 20 litres Sikafloor®-2045 Courtkote
Application steps

SUBSTRATE PREPARATION

Concrete Court

All concrete courts must have waterproof membrane. Allow new concrete surface to cure for 28 days. The concrete should have a wood float or broom finish. Under no circumstances should a steel trowel be used. The concrete should be additive-free and a curing membrane must not be applied to the finished surface.

All dirt, dust and foreign matter should be removed completely from the surface to be applied.

Apply a coat of Sikalastic®-500 Acrylic Primer AP (formerly Davco® Acrylic Primer) or equivalent acrylic primer by soft broom. Allow about 2 hours for it to dry.

APPLICATION

Pour 15 cm - 23 cm ribbon parallel to one of the directions of the surface.

 

Spread coating evenly with a soft rubber edge squeegee by walking in one direction and then reverse the direction. Do not “overwork” and always maintain a wet edge.

After drying, inspect the coating and scrape off any ridges, lumps or other foreign matter. Then apply another uniform coat perpendicular to previous application.

The final coat is to be spread in the same direction as the first coat.

Allow a minimum of 4 hours between each coat. Court will be ready for use 24 hours after final coat. 

If the final colour finish does not appear to be completely even, apply 1 or 2 coats of Sikafloor®-2045 Courtkote only to give a homogeneous colour finish.

Ensure the whole process of application and curing is protected from rain.

CLEANING OF TOOLS

Use water to clean up tools and equipments immediately after use.

Documents