Sika® Igolflex® P-10

Bitumen and solvent

12 months from date of production, if stored properly in unopened and undamaged original sealed packaging.

The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +30 °C. Always refer to packaging.

0.95 ± 0.05 kg/l

+23 °C (Method: closed cup)

54 % ± 2 %

+5 °C min. / +35 °C max.

+5 °C min. / +35 °C max.

~2 hours (+23 °C)

Time is approximate and will be affected by changing ambient conditions particularly temperature and relative humidity.

These figures are theoretical and does not allow for any additional material due to surface porosity, surface profile, variations in level or wastage etc.

Substrate must be uniform, dry or slightly damp, free from dust, loose material, surface contamination, existing coatings, oil, grease, rust and other materials, which could reduce adhesion of the coating. Surface defects (>5 mm) such as blowholes, voids, honeycombing, etc. must be filled / repaired with suitable Sika® repair products.

Surfaces must be cleaned and prepared using suitable preparation techniques to provide a clean slightly textured surface. Defects must be repaired with an appropriate Sika® repair product.

Clean all tools and application equipment with Sika® Colma Cleaner immediately after use. Hardened material can only be removed mechanically.