Show all documents

Davco® Grout 380 ECO

Davco Grout 380 ECO is a one component, shrinkage compensated grout which is specially formulated to have a lower embodied carbon foot print. Davco Grout 380 ECO specially formulated with special additives for high fluidity and is ideal for pressure grouting, requiring only on-site addition of water to provide a non-shrink free flowing grout.

  • Davco Grout 380 ECO is an environmentally friendly product.
  • It is non gaseous, free of bleeding, settlement and shrinkage.
  • Consistent good performance as all ingredients are premixed in the factory.
  • High early and ultimate strength.
  • Eliminates shrinkage in both plastic and hardened phases.
  • Increased strength when fully restrained.
Show all documents

Usage

Davco Grout 380 ECO is suitable for use in all grouting situations where shrinkage is undesirable.

Primary uses are:
Bedding, filling and grouting applications where complete filling of voids with a high strength non-shrink material is required.

Anchoring of mechanical equipment and steel bars:
Grouting to machine baseplates, bedding bridge bearings and under-plate grouting.

Repairs to precast concrete, anchor bolt fixing, cable grouting and crane rail assembly.

Advantages

  • Davco Grout 380 ECO is an environmentally friendly product.
  • It is non gaseous, free of bleeding, settlement and shrinkage.
  • Consistent good performance as all ingredients are premixed in the factory.
  • High early and ultimate strength.
  • Eliminates shrinkage in both plastic and hardened phases.
  • Increased strength when fully restrained.

Documents