S-Welding cord PVC
Complementary welding cord for S-U Bar/ Sarnabar® at perimeter fastening
S-Welding cord PVC is made of PVC-P by extruding procedure.
- Hot air weldable
Complementary welding cord for S-U Bar/ Sarnabar® at perimeter fastening
S-Welding cord PVC is made of PVC-P by extruding procedure.
Plastic pail
Surface: | smooth |
Colour: | red |
Polyvinyl Chloride (PVC-P) compound extruded
5 years from date of production.
Product must be stored in original unopened and undamaged sealed packaging in dry conditions and temperatures between + 5 °C and + 30 °C. Always refer to packaging.
100 m
Diameter 4 mm (+/- 0.2 mm)
18 g/m (+/- 10 %)
The following products must be considered for use depending on roof design:
Not applicable for permanent exposure to UV irradiation.
- 20 °C min. / + 60 °C max.
- 30 °C min. / + 60 °C max.
According to the valid installation instructions for Sarnafil® G/S flat roof waterproofing membranes. Using the Leister tubular nozzle 5 mm and the Leister speed weld nozzle 4 mm of the Leister Triac PID. The S-Welding Cord PVC is welded to the membrane along the Sarnabar perimeter fastening to prevent the membrane from slipping.
This website uses cookies to provide you with a greater user experience.
By using our site, you accept our use of cookies.