Product Data Sheet Show all documents

Sarnafil® PVC Walkway Pad (CN)

INJECTION MOULDED PVC WALKWAY PAD

Sarnafil® PVC Walkway Pad is made of high quality PVC by injection moulding procedure.  

  • Resistant to permanent UV irradiation
  • Outstanding slip resistant surface
  • Hot air welding without use of open flames
  • Rainwater drainage from beneath the Sarnafil® PVC Walkway Pad is provided by a network of moulded channels
Product Data Sheet Show all documents

Usage

Sarnafil® PVC Walkway Pad is used to provide a durable slip resisting walkway for roof maintenance or access on any Sarnafil® PVC or Sikaplan® PVC roofing system.  

Advantages

  • Resistant to permanent UV irradiation
  • Outstanding slip resistant surface
  • Hot air welding without use of open flames
  • Rainwater drainage from beneath the Sarnafil® PVC Walkway Pad is provided by a network of moulded channels

Packaging

20 pcs / box

Colour

Grey

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

Quality management system EN ISO 9001/14001
Product Information

Chemical Base

Polyvinyl Chloride (PVC)

Shelf Life

Sarnafil® PVC Walkway Pad does not expire when properly stored.

Storage Conditions

Sarnafil® PVC Walkway Pad shall be stored in dry conditions.

Surface

Chevron pattern with an alternating rib height of the embossing

Length

605 ± 8 mm

Width

600 ± 10 mm (exclude welding lap)

Thickness

7 mm (± 0.2 mm) including 3 mm non-slip chevron pattern embossing
System information

System Structure

Compatible products:

Sarnafil® PVC -types
Sikaplan® PVC -types

 

Application

Application Information

Ambient Air Temperature

-20 °C min. / +60 °C max.

Substrate Temperature

-30 °C min. / +60 °C max.
Application steps

APPLICATION

Installation works must be carried out only by Sika® trained and approved contractors, experienced in this type of application..
Installation of some ancillary products, e.g. contact adhesives / cleaners is limited to temperatures above +5 °C. Please observe information given by Product Data Sheets.

Special measures may be compulsory for installation below +5 °C ambient temperature due to safety requirements in accordance with national regulations.

Documents